Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterConstruction in Beverly Hills, CA
Roofing in Beverly Hills runs $400-$18,000 depending on whether we’re patching clay tile on a 1920s Spanish Colonial in the flats or installing a full Class A assembly on a Trousdale hillside home. The city’s dual reality - historic preservation south of Santa Monica Boulevard and wildfire-hardened new construction in the hills - means every job starts with understanding which building code regime applies. Call (213) 652-7670 and we’ll send a written quote before any work begins.
Why Beverly Hills Homes Are Different
Beverly Hills operates its own building department, entirely separate from Los Angeles’s LADBS. Contractors here maintain distinct relationships with city plan checkers, inspectors, and the Architectural Commission, which exercises discretionary design review over major projects in ways that don’t apply one block away in West Hollywood or Los Angeles. Because permitted construction values routinely run into the tens of millions on residential parcels, permit fees, bonding requirements, and liability exposure here operate on a scale unlike any neighboring city.
The housing stock splits sharply by terrain. South of Santa Monica Boulevard, the “flats” are dense with 1920s-1950s Spanish Colonial Revival, Tudor Revival, and Art Deco estates whose aging infrastructure - knob-and-tube wiring, cast-iron drain lines, unreinforced chimneys - is constantly gut-renovated behind preserved façades. The hills north of Sunset, especially Trousdale Estates, hold 1950s-1960s mid-century modern homes by Paul R. Williams and A. Quincy Jones that owners either meticulously restore or demolish for trophy builds. The Santa Monica Fault runs through the city, placing portions in a Fault Rupture Hazard Zone requiring seismic studies before hillside permits are issued; the hills also carry Very High Fire Hazard Severity Zone designation, triggering WUI construction standards - fire-rated assemblies, ember-resistant vents, Class A roofing - that add significant cost and code complexity.
Our Main Beverly Hills Services
Most Beverly Hills homeowners who call us start with one of these three projects.
Kitchen Remodeling in Beverly Hills
Kitchen remodeling in Beverly Hills often means working within historic façades on the flats or opening up mid-century plans in the hills. We regularly find galvanized supply lines and ungrounded circuits behind original cabinetry in pre-war homes, while Trousdale kitchens by Williams or Jones may need structural review before removing partition walls. Every quote includes a written scope, material schedule, and the documented photo record we deliver as standard. Kitchen Remodeling in Beverly Hills covers our full process, from permit strategy through final inspection.
Bathroom Remodeling in Beverly Hills
Bathroom remodeling in Beverly Hills presents the same era split: cast-iron drain lines and mud-set tile in 1930s flats, or original terrazzo and floating vanities in 1960s modern homes. We see frequent moisture damage behind original shower membranes in both zones. Our crews are background-checked and uniformed; a live person answers calls 24/7. Bathroom Remodeling in Beverly Hills details how we handle permit coordination with the city’s independent building department.
Home Additions & ADU in Beverly Hills
Home additions and ADU construction in Beverly Hills must navigate the Architectural Commission’s discretionary review for any project visible from the street, plus hillside fault studies and WUI fire standards for northern parcels. We’ve worked with prefab partners including Abodu and Dvele where site conditions allow factory-built efficiency, and with custom stick-frame builds where the Commission demands design integration. Home Additions & ADU in Beverly Hills explains our permit-first approach and fixed-price guarantee under Clause 1 of the Haven Standard.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterRoofing in Beverly Hills
Roofing in Beverly Hills means understanding two distinct hazard zones: the flatlands, where 1920s-1950s homes often carry original clay tile or wood shake that has aged past its service life, and the Trousdale hills, where Very High Fire Hazard Severity Zone designation requires Class A fire-rated assemblies, ember-resistant vents, and non-combustible decking on any new roof or major repair. The Santa Monica Fault adds seismic bracing requirements for hillside structures. We’ve delivered over 4,000 projects since 2007, every one with a written price before work started, and our Roofing hub details the full trade scope.
Roof Repair
Signs you need it
Water staining on ceiling drywall beneath tile roofs, cracked or slipped clay tiles after Santa Ana wind events, or lifted flashing at chimney penetrations on pre-war homes.
What it costs in Beverly Hills
Roof repair in Beverly Hills typically runs $400-$1,800, with tile roof repair specifically ranging $600-$2,500 depending on accessibility and whether matching salvaged tile is required.
How we do it
We photograph the full roof surface from a lift or drone, mark each defect on a printed diagram, replace damaged underlayment and tile with matched materials, and deliver the photo record and inspection-ready documentation before invoicing.
Roof Replacement & Installation
Signs you need it
Multiple leak points, granular loss on asphalt shingles exposing fiberglass mat, or a roof age exceeding 25 years on original clay tile with deteriorated mortar bedding.
What it costs in Beverly Hills
Roof replacement in Beverly Hills ranges $8,000-$20,000 for standard asphalt or composite systems, while metal roof installation runs $15,000-$40,000 where Class A fire rating and WUI compliance are required.
How we do it
We strip to decking, replace deteriorated sheathing, install fire-rated underlayment and ember-resistant venting per WUI standards on hillside homes, finish with the specified roofing system, and schedule Beverly Hills inspection before final payment.
What Roofing Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Roof Repair | $400 - $1,800 |
| Roof Replacement | $8,000 - $20,000 |
| Metal Roof Installation | $15,000 - $40,000 |
| Tile Roof Repair | $600 - $2,500 |
How long does a roof replacement take in Beverly Hills?
Most residential roof replacements in Beverly Hills take 3-5 working days, but hillside projects requiring WUI-compliant assemblies and seismic bracing review can extend to 7-10 days. Call (213) 652-7670 for a written timeline with your estimate.
Do you handle Beverly Hills roofing permits?
Yes, we pull all roofing permits through the city’s independent building department and coordinate inspections; the permit fee structure here differs from LADBS, so we quote it as a line item in every written proposal.
Windows & Doors in Beverly Hills
Windows and doors in Beverly Hills must satisfy conflicting demands: historic preservation south of Santa Monica Boulevard, where the Architectural Commission may require divided-light profiles and wood-clad units that read as original, and wildfire-hardened performance in the Trousdale hills, where WUI standards mandate tempered glass, non-combustible frames, and ember-resistant screening. Energy efficiency matters in both zones, but the solution differs - restored steel casements with interior storms in a 1930s Tudor, versus thermally broken aluminum with low-e coating in a 1960s modern. Our Windows & Doors hub covers the full material and specification range.
Window Replacement
Signs you need it
Single-pane glass with visible condensation damage to surrounding plaster, operable sashes that no longer seal against weatherstripping, or original steel casements with failed glazing putty and active rust.
What it costs in Beverly Hills
Window replacement in Beverly Hills ranges $4,500-$15,000 for a typical residential project, with impact window installation running $8,000-$25,000 where hillside WUI standards or security requirements apply.
How we do it
We measure each opening individually, specify units that match or exceed the original sightlines where Commission review applies, install with proper sill pan flashing and air sealing, and photograph the rough opening and finished installation for the documented record.
Impact Windows & Doors
Signs you need it
Hillside homes in the Very High Fire Hazard Severity Zone requiring tempered or laminated glass, or any owner seeking security enhancement and ember resistance without visible shutters or bars.
What it costs in Beverly Hills
Impact window installation in Beverly Hills typically runs $8,000-$25,000 depending on frame material, glass specification, and whether Architectural Commission review requires custom profiles.
How we do it
We specify laminated glass units with non-combustible frames, submit to the Commission where visible from the street, install with structural attachment rated for seismic loading, and deliver the photo record and performance documentation.
What Windows & Doors Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Window Replacement | $4,500 - $15,000 |
| Impact Window Installation | $8,000 - $25,000 |
Can you match historic window profiles in Beverly Hills?
Yes, we work with manufacturers who produce true divided-light and simulated divided-light units in wood-clad and aluminum profiles that satisfy Architectural Commission review; we submit shop drawings as part of the permit package. Call (213) 652-7670 to review options and receive a written quote.
Do impact windows satisfy WUI requirements in the hills?
Laminated glass impact windows with non-combustible frames and ember-resistant screening satisfy WUI standards for glazed openings, but the full assembly including installation method must be listed and labeled for fire exposure.
Fence Installation in Beverly Hills
Fence installation in Beverly Hills operates under strict visibility rules: the Architectural Commission reviews any fence visible from the public right-of-way, and hillside homes in the Very High Fire Hazard Severity Zone must use non-combustible materials within defensible space perimeters. South of Santa Monica Boulevard, we regularly replace rotted redwood perimeter fencing on 1920s-1950s lots where original picket or board-and-batten fences have decayed at grade; in Trousdale, we install steel and aluminum systems that read as mid-century appropriate while satisfying WUI standards. Our Fence Installation hub details material specifications and permit workflows.
Vinyl Fence
Signs you need it
Rear-yard privacy screening on flats properties where combustibility is not regulated, or pool enclosures requiring low-maintenance washability without paint maintenance.
What it costs in Beverly Hills
Vinyl fence installation in Beverly Hills typically runs $3,500-$9,000 depending on height, panel style, and whether concrete footings are required in the expansive clay soils common south of Santa Monica Boulevard.
How we do it
We lay out the line, auger post holes to 24-inch depth with gravel drainage, set posts in concrete, hang panels with stainless hardware, and deliver the photo record showing post depth and plumb.
Aluminum Fence
Signs you need it
WUI-compliant perimeter or pool fencing on hillside properties where non-combustible construction is mandated, or any visible fence requiring Architectural Commission approval with a material that reads lighter than wrought iron.
What it costs in Beverly Hills
Aluminum fence installation in Beverly Hills ranges $4,000-$10,000, with powder-coated finishes and custom heights adding cost where Commission review requires specific sight-line transparency.
How we do it
We submit material samples and detail drawings to the Commission where required, install with concealed fasteners and seismic-rated footings on slopes, and photograph each post setting and panel alignment for the documented record.
What Fence Installation Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
Does Beverly Hills require permits for fence replacement?
Yes, any fence visible from the public right-of-way requires Architectural Commission review, and all fences over 6 feet or on hillside lots require building permits through the city’s independent department; we handle both as part of our fixed-price quote. Call (213) 652-7670 to schedule a free estimate with permit strategy included.
What fence materials satisfy WUI standards in Trousdale?
Non-combustible materials including aluminum, steel, and masonry satisfy WUI defensible space requirements; wood and vinyl are prohibited within the first 5 feet of structures in the Very High Fire Hazard Severity Zone.
Driveway & Pavers in Beverly Hills
Driveway and paver work in Beverly Hills must navigate two distinct conditions: the flats, where 1920s-1950s homes often have original concrete driveways cracked by expansive clay soils and mature tree root intrusion, and the Trousdale hills, where steep grades require engineered sub-base drainage and WUI-compliant non-combustible surfaces within defensible space zones. Original driveways in the flats were frequently poured without reinforcement or control joints, leading to the pattern cracking we see on Bedford Drive and Roxbury. In the hills, recent spec builds favor large-format porcelain pavers or poured concrete with broom finish for both fire compliance and the clean aesthetic buyers expect. Our Driveway & Pavers hub covers the full specification range.
Paver Driveways
Signs you need it
Spalling concrete with exposed aggregate, standing water after rain indicating settled grade, or a desire to replace asphalt with a permeable surface that reduces runoff on tight flat lots.
What it costs in Beverly Hills
Paver driveway installation in Beverly Hills ranges $7,000-$18,000 depending on base preparation depth, paver material, and whether the Architectural Commission requires specific color or pattern approval for visible driveways.
How we do it
We excavate to 8-12 inches, install geotextile and compacted aggregate base with bedding sand, lay pavers to pattern with edge restraint, sweep polymeric sand, and deliver the photo record showing base depth and compaction.
Concrete Driveways & Concrete Work
Signs you need it
Extensive cracking with vertical displacement exceeding half an inch, surface deterioration exposing rebar or aggregate, or original unreinforced concrete from the 1930s-1950s with no control joints.
What it costs in Beverly Hills
Concrete driveway installation in Beverly Hills typically runs $4,500-$12,000, with driveway replacement ranging $5,000-$14,000 where removal of the existing slab and tree root mitigation are required.
How we do it
We saw-cut and remove existing concrete, address drainage with regraded sub-base, pour with fiber reinforcement and control joints at calculated spacing, finish to specified texture, and photograph the pour and finish for the documented record.
What Driveway & Pavers Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Paver Driveway Installation | $7,000 - $18,000 |
| Concrete Driveway Installation | $4,500 - $12,000 |
| Driveway Replacement | $5,000 - $14,000 |
Can you match original driveway materials in a historic Beverly Hills home?
Yes, we source reproduction hexagonal pavers, exposed aggregate mixes, and broom-finish concrete to match 1920s-1950s original installations, submitting samples to the Architectural Commission where the driveway is visible from the street. Call (213) 652-7670 for a written quote including material matching and permit coordination.
Do hillside driveways need special drainage in Beverly Hills?
Yes, Trousdale and northern hillside driveways require engineered sub-base drainage with perforated pipe and gravel beds to prevent saturation-induced failure on slopes exceeding 15 percent; we design this into every hillside quote.
Brands We Service in Beverly Hills
We maintain active relationships with over fifty vetted material brands, stocking commonly specified items locally for Beverly Hills projects. For roofing, that means GAF and Owens Corning; for windows, Kolbe and Fleetwood; for pavers, Belgard and Techo-Bloc. Turnaround on special-order items typically runs 2-4 weeks, but we confirm availability and document lead times in every written quote before work starts. See our brands for the full list.
Pricing for Construction in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Kitchen Remodel | $14,000 - $45,000 |
| Small Kitchen Remodel | $9,000 - $20,000 |
| Bathroom Remodel | $9,000 - $28,000 |
| Small Bathroom Remodel | $5,000 - $12,000 |
| Roof Repair | $400 - $1,800 |
| Roof Replacement | $8,000 - $20,000 |
| Metal Roof Installation | $15,000 - $40,000 |
| Window Replacement | $4,500 - $15,000 |
| Impact Window Installation | $8,000 - $25,000 |
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
| Paver Driveway Installation | $7,000 - $18,000 |
Prices in Beverly Hills push toward the higher end when Architectural Commission review is required, when WUI fire-rated materials are mandated for hillside work, or when fault-zone geotechnical studies precede foundation or retaining wall work. Under Clause 1 of the Haven Standard, every project receives a flat written price with a written scope before any work begins; no change proceeds without a signed change order.
Neighborhoods We Serve in Beverly Hills
Our crews work throughout Beverly Hills, from the historic flats to the Trousdale hills. Scheduling and dispatch are coordinated from our Los Angeles office, with typical response time of same-day or next-day for estimates.
- Trousdale Estates
- The Flats (south of Santa Monica Boulevard)
- Beverly Hills Gateway
- Beverly Park
- Golden Triangle
Service Area - Cities Near Beverly Hills
We serve Beverly Hills directly and maintain active project schedules in adjacent communities. Homeowners in West Hollywood, CA often face similar hillside conditions and LADBS permitting rather than Beverly Hills’s independent department. We also work in Studio City, CA, Culver City, CA, and Sherman Oaks, CA, bringing the same written-price discipline and documented photo record to every job.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Construction in Beverly Hills
Beverly Hills maintains its own building department, plan checkers, and inspectors entirely separate from LADBS, with an additional layer of Architectural Commission review for any work visible from the public right-of-way; permit fees and bonding requirements here scale to construction values that routinely reach tens of millions on residential parcels.
Yes, we prepare submittal packages for HOA architectural committees and the city’s Architectural Commission as part of our standard service, including material samples, detailed drawings, and photo simulations where required; this coordination is quoted as a line item with a defined timeline.
Bring any existing architectural plans, a recent survey if available, and competitor written estimates if you’d like our free second opinion; we’ll review line by line at no charge, then deliver our own written price within 48 hours. Call (213) 652-7670 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Good communication throughout. Weekly written update meant I never had to chase them."
- Nadine G."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O.