KraftMaid Windows & Doors Nationwide

KraftMaid Windows & Doors: The Los Angeles Owner’s Guide

We stock and install KraftMaid-compatible replacement windows and doors across Los Angeles, with most projects quoted in the $5,310-$17,700 range for full window replacement and $9,440-$29,500 for impact-rated units. Most standard sizes are available within 2-3 business days; custom KraftMaid configurations typically ship in 10-14 days. Los Angeles homeowners usually discover a problem when a casement window crank strips, a sliding door track warps enough to bind, or they notice the frame gap widening after a Santa Ana wind cycle.

Call (213) 652-7670

Rowan Construction Group Los Angeles is an independent service provider, not affiliated with KraftMaid.

Which KraftMaid Models This Applies To

KraftMaid’s window and door program has shifted over the past decade. The current line is built around a limited partnership with exterior door specialists, while earlier KraftMaid-branded windows (roughly 2008-2018) were manufactured under license by regional suppliers. The critical compatibility gotcha: pre-2015 KraftMaid windows used a proprietary jamb depth of 5-1/2 inches in their premium series, while post-2015 production shifted to standard 4-9/16-inch jambs to match common California framing. If you’re replacing a sash or frame component, measure the jamb depth before ordering anything.

To identify your unit, check the interior top jamb for a foil label with a 6- to 10-digit model code beginning with “KM” or “KMW.” The third digit indicates the series: “1” for builder grade, “2” for mid-grade, “3” for premium. For doors, the hinge stile label includes the fire-rating and the handing (LH or RH). We carry both OEM KraftMaid hardware kits and quality aftermarket equivalents from Truth Hardware and Hoppe; the aftermarket route saves 15-25% on hardware-only jobs and carries the same 10-year finish warranty in most cases.

Signs Your KraftMaid Windows & Doors Is Failing

• The crank handle spins without moving the sash. This is almost always a stripped operator gearbox, common on KraftMaid casement units after 8-12 years of use. The zinc alloy gears fatigue from the repetitive load of pushing against weatherstripping compression.
• Visible daylight between the sash and frame when closed. The bulb seal has compressed past recovery or the wool pile has worn away. In Los Angeles, UV exposure accelerates this; south-facing units often need seal replacement at year 7 rather than the rated 15.
• The sliding door requires shoulder force to move. The tandem roller carriage has flat-spotted or the stainless track has developed a bow from thermal expansion. On KraftMaid’s heavier solid-core patio doors, this load often cracks the corner joint of the operating panel.
• Condensation between double-pane glass. The edge seal has failed and the desiccant is saturated. Once you see mineral staining or fog that doesn’t wipe away, the insulated glass unit (IGU) is done; there is no field repair that restores the argon fill or the low-E coating.
• The multipoint lock doesn’t engage at all three points. The keepers have shifted in their mortises, or the central gearbox has worn. On KraftMaid’s three-point systems, a single failed locking point stresses the others and will eventually distort the locking rail.

Before

After

Replacement Cost & What’s Included

For Los Angeles properties, full KraftMaid window replacement runs $5,310-$17,700 depending on unit size, glazing specification, and whether the existing frame is preserved or replaced. Impact-rated units for coastal zones or hillside fire-prone areas fall in the $9,440-$29,500 range. Hardware-only repairs (crank operators, roller carriages, multipoint locks) typically land between $470-$2,125 installed.

Every quote we write includes the part, labor, disposal of the old unit, and a documented photo record of the opening condition before and after. Under Clause 1 of the Haven Standard, that price is fixed; no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation and the hardware function. If it’s not written down, it didn’t happen.

DIY or Call Us?

There is a safe middle ground here. A homeowner can check the foil label for the model code, measure the sash opening width and height, and photograph the hardware profile. What goes wrong is the removal of a fixed or operating sash on a second-story unit, or the adjustment of a multipoint lock with the door under its own weight. The spring-loaded top-hung hardware on KraftMaid’s larger casements carries real pinch risk, and a dropped patio door panel bends the track beyond repair.

We carry Truth Hardware operators, Hoppe multipoint sets, and common roller carriages on our trucks. For the full unit replacement, we measure, order, and install. Call (213) 652-7670 to schedule your free estimate.

FAQs