CGI Kitchen Remodeling Nationwide

CGI Kitchen Remodeling: The Los Angeles Owner’s Guide

CGI kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 for a full project, with cabinet installation, countertop replacement, and island reconfiguration priced separately before work begins. We stock CGI-compatible cabinet systems, hardware, and finishing components, and we can usually schedule a measurement visit within 48 hours. Most Los Angeles homeowners discover their CGI kitchen needs attention when cabinet doors sag, drawer glides stick, or the original particleboard substrate swells near sink plumbing in older Mid-Century builds.

Call (213) 652-7670

Which CGI Models This Applies To

CGI, or Cabinetworks Group International, produces semi-custom and stock cabinetry under several brand lines including Legacy, Premier, and Builder’s Choice. The model identifier is stamped on the hinge cup or inside the drawer box on a white paper label with a 6-digit SKU; if that label is gone, measure the overlay (how much the door covers the frame) and note whether the hinge is a 35mm or 40mm cup, since CGI shifted cup sizes between the 2018 and 2022 production runs. We match both OEM CGI hardware and quality aftermarket equivalents from Blum and Salice, which carry the same soft-close spec at a lower unit cost. The aftermarket route makes sense for Los Angeles homeowners with CGI Builder’s Choice lines, where the original hinge bore pattern is standard and replacement is straightforward. For CGI Premier inset doors, we typically source OEM; the reveal tolerances are tighter, and a millimeter of slop shows.

Signs Your CGI Kitchen Remodeling Is Failing

• Doors hang crooked or won’t stay closed. The original CGI hinge cup loosens in the particleboard stile, especially in kitchens west of the 405 where coastal humidity swings are sharper. We see this most in 10- to 14-year-old installs where the substrate has cycled through enough summers.
• Drawer boxes bind or drop when loaded. CGI’s standard undermount glide is rated for 75 pounds, but Los Angeles homeowners often load pots and appliances heavier than spec; the steel ball carriage fatigues and the polymer retaining clip cracks.
• Sink base cabinet floor is soft or discolored. The melamine surface fails at the plumbing penetrations, letting water wick into the particleboard core. In hillside homes from Silver Lake to Echo Park, we’ve found this where the shutoff valve dripped undetected behind the toe kick.
• Finished surfaces peel or delaminate at edges. Thermofoil and polyester wraps lift when exposed to sustained heat near ovens or west-facing windows without UV film. The 2015-2019 CGI thermofoil runs were particularly susceptible above 85 degrees surface temperature.
• Island panels separate or rack out of square. CGI island cabinets shipped as modular boxes rely on proper fastening to a substrate or cleat; if the original installer skipped the corner bracket or used drywall screws instead of cabinet screws, the box torques under the countertop load.

Before

After

Replacement Cost & What’s Included

What drives the range: cabinet grade (Builder’s Choice stock vs. Premier semi-custom), countertop material (quartz from Cambria or Silestone runs higher than laminate), and whether we’re working within existing footprints or moving plumbing and gas lines. Every quote from Rowan Construction Group Los Angeles is a flat written price with line-item breakdown; under Clause 1 of The Haven Standard, that price is delivered before any work starts. Our 365-Day Done Right Promise covers the installation and any defects in workmanship. If it’s not written down, it didn’t happen.

DIY or Call Us?

An owner can safely check the hinge cup tightness with a screwdriver and confirm whether a drawer glide is fully seated in the rear bracket. What goes wrong past that point: adjusting CGI cabinet doors requires a systematic approach to the three-axis hinge screws, and stripping the adjustment cam means replacing the entire hinge cup in a drilled hole that won’t hold a second press-fit. For sink base repairs, the cabinet must be unloaded and often the countertop partially detached to replace the floor panel properly. We don’t recommend homeowners attempt structural reconfiguration of island cabinets; the countertop load path and any electrical or plumbing rough-ins create real safety and code issues. Call (213) 652-7670 to schedule a free estimate. We’ll measure, photograph the existing conditions, and deliver a written price with no obligation.

FAQs