Barrette Kitchen Remodeling Nationwide

Barrette Kitchen Remodeling: The Los Angeles Owner’s Guide

Barrette kitchen remodeling in Los Angeles typically runs $16,520-$53,100 for a full project, with cabinet installation alone ranging $4,720-$15,340 depending on layout complexity and material grade. We stock and install Barrette-compatible components across their full product line, and we can usually source specific Barrette parts within 24-48 hours through our network of fifty-plus vetted suppliers. Most Los Angeles homeowners discover their Barrette kitchen needs attention when cabinet doors begin sagging, drawer glides stick in humid coastal air, or laminate surfaces delaminate after years of temperature swings between inland heat and marine layer moisture.

Call (213) 652-7670

Which Barrette Models This Applies To

Barrette produces several kitchen product lines that circulate in the Los Angeles market, and matching the right component requires reading the label inside the cabinet door frame or on the drawer box underside. The Barrette Classic Series, common in 1990s-2000s Los Angeles tract homes from Sherman Oaks to Carson, uses a 35mm concealed hinge bore pattern and 1/2-inch overlay standard. The newer Barrette Pro Series, found in recent West Adams and Highland Park renovations, shifted to a 1-1/4-inch full-overlay frameless construction with soft-close hardware pre-installed.

We carry both OEM Barrette replacement hinges and drawer boxes, plus quality aftermarket equivalents from Blum and Salice that match the bore patterns exactly. The aftermarket route saves 20-30% on hardware costs without sacrificing function, though we recommend OEM for exact color-matched laminate or thermofoil door fronts where the original Barrette dye lot matters. One compatibility gotcha: Barrette’s 2015-2019 transition period used a proprietary 5/8-inch side-wall thickness that standard aftermarket drawer glides won’t fit without shimming. We measure on-site before ordering anything.

Signs Your Barrette Kitchen Remodeling Is Failing

• Doors hang crooked or won’t stay closed. The 35mm cup hinge has worn its plastic buffer or the mounting plate screw holes have wallowed out in the particleboard frame. In Los Angeles, the dry Santa Ana seasons shrink wood fibers, then summer humidity swells them, cycling the screws loose over five to seven years.
• Drawers bind, stick, or drop when pulled. The roller or ball-bearing glide has lost lubrication or the cabinet box itself has racked out of square. Barrette’s original nylon-wheel glides, common in pre-2010 installations, degrade faster in direct sunlight through unshaded kitchen windows.
• Laminate surfaces bubble or peel at edges. Moisture has penetrated the substrate, usually from a persistent sink leak or steam from a poorly vented range. The delamination starts at the edge banding because Barrette’s older PVA adhesive breaks down with repeated wet-dry cycling.
• Shelves sag or collapse under normal load. The 5/8-inch particleboard shelf has exceeded its span rating, or the plastic shelf clip has cracked. We’ve replaced dozens in Los Angeles where owners loaded Barrette’s 24-inch wall cabinets with heavy dishware the 3/4-inch upgrade shelf was designed for.
• Foul odor from under-sink cabinets. The sink base floor has absorbed water through a slow drain leak, and the particleboard is off-gassing as it degrades. Barrette’s pre-2015 sink bases lacked the full melamine wrap on the floor panel that later models include.

Before

After

Replacement Cost & What’s Included

The spread on these numbers comes down to three things: kitchen square footage, material grade, and how much structural modification the existing space requires. A Barrette Pro Series install in a 1960s Los Angeles bungalow with settled floors and out-of-square walls takes longer to shim and level than new construction in Playa Vista. Our quotes itemize every line - cabinets, hardware, labor hours, permit fees if we’re moving walls or electrical - so the number you sign is the number you pay. Under Clause 1 of the Haven Standard, that written price arrives before anyone picks up a tool. If it’s not written down, it didn’t happen.

Every Barrette kitchen project carries our 365-Day Done Right Promise: if a hinge loosens, a seam gaps, or a drawer drags within a year, we return and make it right at no charge. The warranty is printed on every contract, not an asterisk.

DIY or Call Us?

There’s honest work a homeowner can do on a Barrette kitchen without calling anyone. Tightening a loose hinge screw with a Pozidriv #2 driver, swapping a shelf clip, or adjusting the drawer front alignment with the built-in cam screws - these are reasonable Saturday tasks. We even walk some callers through it on the phone if the fix is that straightforward.

Where DIY goes wrong is structural: replacing wall cabinets solo risks injury and wall damage if the French cleat or rail system isn’t properly supported during removal. Cutting countertop laminate or attempting to modify cabinet boxes for new appliance sizes without proper dust containment and edge sealing invites moisture intrusion. And any work involving electrical relocation, gas line modification, or load-bearing wall assessment requires permits and licensed trades in Los Angeles - the Department of Building and Safety will red-tag unpermitted work and require it be opened for inspection.

We’re not affiliated with Barrette - we’re an independent contractor who knows their product lines from eighteen years of installing and repairing them across Los Angeles. If you’re unsure whether your issue is a twenty-minute fix or a full replacement, call us at (213) 652-7670. We’ll look at it, photograph what we find, and give you a written price before any work starts.

FAQs