Tremron Home Additions & ADU Nationwide

Tremron Home Additions & ADU: The Los Angeles Owner’s Guide

We stock and install Tremron-compatible hardscape materials for home additions and ADU projects throughout Los Angeles, with typical installed pricing from $53,100 to $153,400 for full additions and $106,200 to $259,600 for detached ADUs. Tremron pavers, retaining wall block, and outdoor living components are commonly specified for the transition zones between existing structures and new construction. Most homeowners discover an issue when settling or drainage problems appear at the junction between old and new foundations, or when Tremron surface materials show spalling, efflorescence, or joint failure after heavy rain seasons.

Call (213) 652-7670

Which Tremron Models This Applies To

Tremron’s product lines for residential additions and ADU hardscaping fall into three main categories: the Olde Towne and Aqua paver series for patios and walkways, the Stonegate retaining wall system for grade changes, and the Sierra outdoor living components for fire pits and seating walls. To identify your exact material, check the production stamp on the pallet tag or the underside of a loose paver, it will show the series name, color run, and manufacturing date code.

The OEM-versus-aftermarket decision for Tremron in Los Angeles is straightforward: for load-bearing applications like driveway extensions or ADU entry pads, we source direct from Tremron’s Florida distribution to ensure the 8,000 PSI compressive strength rating matches the original spec. For non-structural accent bands or decorative borders, we may specify compatible alternatives from Belgard or Techo-Bloc that meet the same ASTM C936 standard, which keeps the written quote honest rather than inflated. Color matching is the gotcha, Tremron’s Sierra color runs shift between production lots, so we always pull from the same lot for contiguous surfaces. If your addition ties into existing Tremron installed two or more years ago, expect a visible shade difference even with the same color name.

Signs Your Tremron Home Additions & ADU Is Failing

• Efflorescence blooming on paver faces. White mineral deposits indicate moisture migration through the bedding sand and base, common in Los Angeles where clay-heavy soils in neighborhoods like Palms and Mar Vista trap water against foundation walls. The underlying cause is usually inadequate drainage slope or a missing geotextile barrier.
• Joint sand washing out between pavers. Polymeric sand degradation happens faster in Tremron installations with heavy foot traffic or where irrigation overspray keeps the surface damp. Once the joints empty, the interlock fails and individual pavers rock under load.
• Retaining wall block tilting or stepping out. Stonegate walls fail at the base course when the aggregate footing was placed without compaction or when the drain pipe behind the wall clogged with silt. In hillside areas of Silver Lake or Echo Park, hydrostatic pressure builds fast during winter storms.
• Spalling or surface flaking on fire pit caps. Sierra caps subjected to thermal cycling, rapid heating from gas burners followed by cooling from marine layer moisture, develop micro-fractures that flake the pressed surface. This is a materials limit, not an installation error.
• Settlement ridges where old concrete meets new Tremron. The most expensive symptom: differential settlement between the existing slab and the new paver base, usually from inadequate tie-in depth or skipping the 6-inch compacted Class II base extension under the joint.

Before

After

Replacement Cost & What’s Included

What drives the range: access difficulty (hand-carrying materials through a narrow side yard in Mid-City adds labor hours), base condition (whether we can reuse compacted aggregate or excavate to clay), and whether the project triggers Los Angeles Department of Building and Safety permit requirements for retaining walls over 30 inches or any work within setback zones. Every quote we write includes the paver or block unit cost, base material and compaction, edge restraint, joint sand or mortar, and disposal of the failed material. Under Clause 1 of the Haven Standard, that written price is delivered before any work starts. Our 365-Day Done Right Promise covers workmanship and material defects, and every visit includes a documented photo record of the substrate condition, the repair process, and the finished surface.

DIY or Call Us?

What you can safely check yourself: walk the surface with a 4-foot level to identify low spots, probe joint depth with a screwdriver to see if sand has eroded, and clear weep holes or drain outlets behind retaining walls. These checks cost nothing and tell you whether the problem is superficial or structural.

Where DIY goes wrong: resetting pavers without addressing the base failure guarantees recurrence within one Los Angeles rainy season. Cutting retaining wall block requires a wet saw with diamond blade, improper cuts weaken the unit and create failure points. Most critically, any work that disturbs the connection between existing and new construction, the tie-in zone, risks undermining your foundation’s seismic stability. California’s Title 24 energy code and Los Angeles zoning ordinances also require permitted work for ADU hardscape that changes drainage patterns or impervious surface ratios.

We’re an independent service provider, not affiliated with Tremron. If the problem involves load-bearing surfaces, gas-fired features, or permit-triggering scope, call (213) 652-7670 and we’ll schedule a free estimate with a written line-item quote.

FAQs