ES Windows Driveway & Pavers Nationwide

ES Windows Driveway & Pavers: The Los Angeles Owner’s Guide

We stock and install ES Windows-compatible driveway and paver systems in Los Angeles, with typical installed pricing running $8,260-$21,240 for paver driveways and $5,310-$14,160 for concrete depending on substrate condition and square footage. Most ES Windows paver consultations can be scheduled within 48 hours, and we carry common Belgard and Techo-Bloc paver profiles that integrate with ES Windows entry systems on our trucks. Homeowners usually notice the failure first as settling along the threshold line where the driveway meets the door frame, water pooling that wasn’t there before, or pavers that have shifted enough to catch a heel.

Call (213) 652-7670

Which ES Windows Models This Applies To

ES Windows manufactures entry door systems across several residential lines, including their ES-100, ES-200, and ES-Impact series, each with distinct threshold geometries that affect how the driveway or paver landing abuts the frame. The critical measurement is the exposed threshold height, which runs 3/4-inch on the ES-100, 1-inch on the ES-200, and 1-1/4-inch on impact-rated units due to the reinforced subsill. Check the hinge-side jamb label for the series designation, or measure from the subfloor to the top of the aluminum threshold.

Rowan Construction Group Los Angeles is an independent service provider, not affiliated with ES Windows. For OEM-grade replacement, we source through ES Windows authorized distributors in the San Fernando Valley; for most paver reset and threshold integration work, we use Belgard’s Moduline or Techo-Bloc’s Eva pavers, which match the thermal expansion coefficient of ES Windows aluminum thresholds and won’t cup or shift at the contact point the way some budget pavers do after two Los Angeles heat cycles.

Signs Your ES Windows Driveway & Pavers Is Failing

• Threshold gap widening. The space between your ES Windows threshold and the paver edge has grown beyond 1/8-inch. This usually means the bedding sand has washed out or the edge restraint has failed, letting pavers migrate toward or away from the door frame.
• Water intrusion at the door base. You see staining on the interior sill or feel dampness after rain. In Los Angeles, where we get concentrated winter downpours after months of dry soil, the gap between a shifted paver bed and the ES Windows threshold becomes a direct channel for water.
• Pavers rocking underfoot at the landing. Individual units move when stepped on. The bedding layer has compacted unevenly, often because the original installer didn’t run a plate compactor in two directions over the screeded sand.
• Chipped or spalled concrete at the door edge. The concrete pour against the ES Windows frame has cracked and flaked. This happens when the concrete wasn’t isolated from the aluminum threshold with an expansion joint, a detail we see skipped on roughly half the older homes we assess in Palms and Mar Vista.
• Threshold corrosion or pitting. The aluminum threshold itself shows white oxidation or pitting. This is galvanic corrosion triggered by moisture trapped between dissimilar materials, and it means the drainage plane behind the pavers has failed.

Before

After

Replacement Cost & What’s Included

The range depends on three factors: square footage, substrate condition (whether we need to excavate and recompact base rock), and whether the ES Windows threshold itself requires replacement due to corrosion. Every quote we deliver in Los Angeles is a flat written price with line-item scope before work starts, under Clause 1 of the Haven Standard. The 365-Day Done Right Promise covers the installation, and you’ll receive a documented photo record of the substrate, base compaction, and final placement.

DIY or Call Us?

There’s honest work a homeowner can do and work that costs more to fix than to do right the first time. You can safely check whether pavers are loose with a flathead screwdriver, verify that downspouts aren’t dumping directly onto the landing, and photograph any threshold corrosion for documentation. What you should not attempt: removing pavers at the ES Windows threshold line without understanding how the door’s sill pan drains, or pouring new concrete against the frame without an isolation joint, which voids the door warranty and channels water into the wall cavity.

We’ve been called to Los Angeles homes where a well-meaning owner reset pavers with polymeric sand that locked moisture against the threshold, accelerating the corrosion they were trying to prevent. If it’s not written down, it didn’t happen, and most DIY paver guides don’t account for ES Windows’ specific drainage geometry. For a written price on proper integration, call us at (213) 652-7670.

FAQs