GAF Kitchen Remodeling Nationwide

GAF Kitchen Remodeling: The Los Angeles Owner’s Guide

GAF kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 for a complete project, with cabinet installation, countertop replacement, and backsplash work priced separately so you know exactly where your money goes. We stock GAF-compatible materials and can usually begin demolition within two weeks of signed approval. Most Los Angeles homeowners discover their kitchen needs attention when cabinet boxes swell from coastal humidity, laminate countertops delaminate near the sink, or tile backsplashes crack along the grout lines where the 405 corridor’s seismic settling has done its work.

Call (213) 652-7670

Which GAF Models This Applies To

GAF does not manufacture kitchen cabinets, countertops, or fixtures directly. What we mean by “GAF kitchen remodeling” is the full-scope kitchen renovation service that Rowan Construction Group delivers using GAF roofing and exterior products when the project includes skylights, roof modifications for venting, or exterior wall work tied to kitchen expansion. If you’re here because your kitchen needs rebuilding and your home already carries GAF roofing, we coordinate the trades so the exterior envelope stays warrantied.

To identify what you’re working with: check your roof shingle bundle tags in the garage or attic for the GAF model name (Timberline HDZ, Timberline UHD, or Grand Sequoia are common in Los Angeles County). For the kitchen itself, look inside cabinet boxes for the manufacturer’s stamp, usually on the hinge side of the door or the drawer box corner. KraftMaid and Wellborn are the cabinet lines we most often pair with GAF exterior work. The OEM-versus-aftermarket question doesn’t apply to GAF here, but it does for cabinets: factory-spec KraftMaid boxes versus compatible pre-finished cases that meet the same KCMA durability standard. We quote both, with the spec sheet attached, so you choose based on number, not guesswork.

Signs Your GAF Kitchen Remodeling Is Failing

• Soft spots in the subfloor near the sink or dishwasher. In Los Angeles, the combination of hard water and aging supply lines means slow leaks often go unnoticed until the particleboard subfloor swells. We find this regularly in Mid-Century homes from Palms to Mar Vista, where original galvanized lines are still in service.
• Upper cabinets pulling away from the wall. This usually means the installer missed the stud or used inadequate fasteners for the load. In earthquake country, that’s a safety issue, not just cosmetic. We open the wall, install blocking where needed, and use structural screws rated for seismic zones.
• Countertop seams separating or discoloring. On laminate, this means water intrusion at the joint. On stone, it’s often a failed adhesive bond from thermal cycling, which is aggressive in Los Angeles where kitchen temperatures swing from 55°F winter mornings to 85°F summer afternoons near west-facing windows.
• Grout crumbling in the backsplash behind the range. Heat expansion and grease particulate break down Portland-based grout faster than wall areas. We spec epoxy grout in this zone, which costs more upfront and lasts three times as long in our experience.
• Drawer boxes binding or dovetails splitting. This is humidity cycling in coastal Los Angeles neighborhoods like Venice and Playa del Rey, or the dry heat of the Valley in Sherman Oaks and Studio City. Solid wood boxes move; particleboard boxes delaminate. We document which you have before quoting replacement.

Before

After

Replacement Cost & What’s Included

What drives the range: square footage, whether we’re moving plumbing or gas lines, and material grade. A 10×10 kitchen with stock KraftMaid cabinets, quartz countertops from Cambria or Silestone, and standard appliance locations sits at the lower end. A 200-square-foot kitchen with custom Wellborn inset cabinets, waterfall-edge stone, and relocated plumbing for a professional range hits the upper number. Every quote from Rowan Construction Group Los Angeles is a flat price with line-item breakdown: demolition, rough electrical, plumbing, cabinets, countertops, backsplash, flooring, trim, and final inspection. Under Clause 1 of The Haven Standard, that written price is delivered before any work starts. No change proceeds without a signed change order, which is why our projects finish within a few percent of the agreed number.

DIY or Call Us?

There’s honest work a homeowner can do: measure your cabinet openings, photograph existing conditions, and verify appliance rough-in dimensions against the manufacturer’s spec sheet. What goes wrong fast: demolishing a load-bearing wall without engineering approval (common in 1940s Los Angeles bungalows where the kitchen and dining room were originally separate), rerouting gas lines without a permit and pressure test, or installing countertops without accounting for cabinet leveling tolerances. We’ve been called to fix DIY cabinet installs where the homeowner used drywall screws instead of cabinet screws and the entire run pulled loose within six months. If you’re considering self-demo, call us first at (213) 652-7670 for a free assessment. We’ll tell you what’s straightforward and what’s not worth the risk.

FAQs